Allen & Heath Xone:464 XONE 464 ユーザーズマニュアル
製品コード
XONE 464
4
XONE:464 User Guide
Important Mains plug wiring instructions.
The console is supplied with a moulded mains plug fitted to the AC
mains power lead. Follow the instructions below if the mains plug has
to be replaced.
mains power lead. Follow the instructions below if the mains plug has
to be replaced.
The wires in the mains lead are coloured in accordance with the
following code:
following code:
WIRE COLOUR
TERMINAL
European
USA/Canada
L
LIVE
BROWN
BLACK
N
NEUTRAL
BLUE
WHITE
E
EARTH GND
GREEN & YELLOW
GREEN
The wire which is coloured Green and Yellow must be connected to
the terminal in the plug which is marked with the letter E or with the
Earth symbol.
the terminal in the plug which is marked with the letter E or with the
Earth symbol.
This appliance must be earthed.
The wire which is coloured Blue must be connected to the terminal in
the plug which is marked with the letter N.
the plug which is marked with the letter N.
The wire which is coloured Brown must be connected to the terminal
in the plug which is marked with the letter L.
in the plug which is marked with the letter L.
Ensure that these colour codes are followed carefully in the event of
the plug being changed.
the plug being changed.
Precautions
Damage :
To prevent damage to the controls and cosmetics avoid placing heavy
objects on the control surface, scratching the surface with sharp
objects, or rough handling and vibration.
objects on the control surface, scratching the surface with sharp
objects, or rough handling and vibration.
Environment :
Protect from excessive dirt, dust, heat and vibration when operating
and storing. Avoid tobacco ash, smoke, drinks spillage, and exposure
to rain and moisture. If the console becomes wet, switch off and
remove mains power immediately. Allow to dry out thoroughly before
using again.
and storing. Avoid tobacco ash, smoke, drinks spillage, and exposure
to rain and moisture. If the console becomes wet, switch off and
remove mains power immediately. Allow to dry out thoroughly before
using again.
Cleaning :
Avoid the use of chemicals, abrasives or solvents. The control panel is
best cleaned with a soft brush and dry lint-free cloth. The faders,
switches and potentiometers are lubricated for life. The use of
electrical lubricants on these parts is not recommended.
best cleaned with a soft brush and dry lint-free cloth. The faders,
switches and potentiometers are lubricated for life. The use of
electrical lubricants on these parts is not recommended.
Transporting :
The console may be transported as a free-standing unit or mounted in
a rack or flightcase. Ensure that the connector pod is secured in place
with the locking screws fitted to prevent movement. Protect the
controls from damage during transit. The faders are best positioned at
the top of their travel if the console is transported without a suitable
flightcase, rack or carton. Use adequate packing if you need to ship
the unit.
a rack or flightcase. Ensure that the connector pod is secured in place
with the locking screws fitted to prevent movement. Protect the
controls from damage during transit. The faders are best positioned at
the top of their travel if the console is transported without a suitable
flightcase, rack or carton. Use adequate packing if you need to ship
the unit.