CommScope Inc. of North Carolina AIRBRIDGE-AP ユーザーズマニュアル
32
Appendix D: Firmware Upgrades
The most recent version of firmware may be made available by contacting CommScope.
MICROCONTROLLER FIRMWARE UPGRADE
To download a new firmware from a computer to the AP microcontroller, it is necessary to have a TFTP
client capable of sending a binary file. The parameters to send the firmware are:
To download a new firmware from a computer to the AP microcontroller, it is necessary to have a TFTP
client capable of sending a binary file. The parameters to send the firmware are:
Target filename: APP
Transfer mode: binary (octet)
Target port: 70
Block size: 512
Transfer mode: binary (octet)
Target port: 70
Block size: 512
Note: The file to be downloaded must be the .bin
(binary) image, not the hex version! File size should
be 69,376 bytes.
(binary) image, not the hex version! File size should
be 69,376 bytes.
ETHERNET CONTROLLER FIRMWARE UPGRADE
To download a new firmware from a computer to the AP Ethernet interface controller, it is necessary to
have a TFTP client capable of sending a binary file. The parameters to send the firmware are:
Target filename: X1
Transfer mode: binary (octet)
Target port: 69
Block size: 512
To download a new firmware from a computer to the AP Ethernet interface controller, it is necessary to
have a TFTP client capable of sending a binary file. The parameters to send the firmware are:
Target filename: X1
Transfer mode: binary (octet)
Target port: 69
Block size: 512
Note: The file to be downloaded must be the .ROM
(binary) image, not the hex version! File size should be
32768 or 65536 bytes.
(binary) image, not the hex version! File size should be
32768 or 65536 bytes.