Ubiwave CM-08-24-CP-11 ユーザーズマニュアル
UW-CM-08 User Manual
UW-CM-08
high-performance wireless mesh network module
high-performance wireless mesh network module
Product description
The UW-CM-08 is a high-performance wireless module
targeted at driving the communication part of high-end
mesh networks. The UW-CM-08 has all functionalities inte-
grated in hardware and software to build robust and large
wireless mesh networks.
The UW-CM-08 is the compact version of Ubiwave’s suc-
cessful UW-CN-06 and comes in two different versions, the
UW-CM-08-CP, with on-board chip antenna, and the UW-
CM-08-XT, where an off-module external antenna can be
used.
The features of the UW-CM-08 are aimed at performance-
critical applications in terms of reliability and the range of
the communication. It further includes a variety of input and
output functionalities.
The UW-CM-08 is designed to be SMD-mounted onto a
host PCB. SMD-mounting provides the best performance at
the lowest cost. Additionally the UW-CM-08 was designed
to occupy minimal board space. The host PCB would typi-
cally include sensor/actuator interfacing circuits as well as
the power circuit.
The UW-CM-08 communicates in the 2.4 - 2.4835 GHz
unlicensed ISM band, and conforms with EN 300 440
(Europe), FCC CFR47 Part 15 (US) and ARIB STD-T66
(Japan).
targeted at driving the communication part of high-end
mesh networks. The UW-CM-08 has all functionalities inte-
grated in hardware and software to build robust and large
wireless mesh networks.
The UW-CM-08 is the compact version of Ubiwave’s suc-
cessful UW-CN-06 and comes in two different versions, the
UW-CM-08-CP, with on-board chip antenna, and the UW-
CM-08-XT, where an off-module external antenna can be
used.
The features of the UW-CM-08 are aimed at performance-
critical applications in terms of reliability and the range of
the communication. It further includes a variety of input and
output functionalities.
The UW-CM-08 is designed to be SMD-mounted onto a
host PCB. SMD-mounting provides the best performance at
the lowest cost. Additionally the UW-CM-08 was designed
to occupy minimal board space. The host PCB would typi-
cally include sensor/actuator interfacing circuits as well as
the power circuit.
The UW-CM-08 communicates in the 2.4 - 2.4835 GHz
unlicensed ISM band, and conforms with EN 300 440
(Europe), FCC CFR47 Part 15 (US) and ARIB STD-T66
(Japan).
Applications
• Security and Safety Systems
• Healthcare Applications
• Asset Management
• Asset Management
• Building & Home Automation
• Industrial Automation
Versions
• UW-CM-08-CP: version with on-module chip an-
tenna. Ideally suited for all multi purpose wireless
mesh solutions. Supports ultra-low-power applica-
tions, in combination with long transmission range
mesh solutions. Supports ultra-low-power applica-
tions, in combination with long transmission range
• UW-CM-08/XT: version where RF signal connects
to external antenna; ideally suited for all multi pur-
pose wireless mesh solutions, requiring a metal
enclosure. Supports ultra-low-power applications,
in combination with long transmission range.
pose wireless mesh solutions, requiring a metal
enclosure. Supports ultra-low-power applications,
in combination with long transmission range.
Radio features
•
Radio: IEEE 802.15.4 radio component, operating in
2.4GHz ISM band
2.4GHz ISM band
•
Channels: 16
•
Data rate: 250 kbps (PHY layer)
•
Antenna: chip antenna or external.
•
Long range: Power amplifier up to 10dBm (ETSI) and
up to 17dBm (FCC) extends range up to 100m indoors
and 1km outdoors for a single link.
Communication range (in meters, typical and max)
measured with on-board ceramic antenna:
up to 17dBm (FCC) extends range up to 100m indoors
and 1km outdoors for a single link.
Communication range (in meters, typical and max)
measured with on-board ceramic antenna:
In the presence of metallic objects, a shorter range can
be observed.
be observed.
•
Ultra-Low-Power: Nodes can operate for years without
replacing batteries.
replacing batteries.
Additional hardware features
•
Designed for low-power: on-board power manage-
ment, including low-frequency clock source, various
power-down modes.
ment, including low-frequency clock source, various
power-down modes.
•
Large amount of IO: 32 digital and analogue IOs, in-
cluding 8 channel 10 bit ADC, 2 UARTS, SPI, JTAG.
cluding 8 channel 10 bit ADC, 2 UARTS, SPI, JTAG.
•
Cost-optimized compact surface-mounted module:
only 35.5 by 16.5 mm, occupies only small board space,
SMD technology does away with expensive connectors.
only 35.5 by 16.5 mm, occupies only small board space,
SMD technology does away with expensive connectors.
•
Robust and compact design: The surface-mountable
module ensures robust, sturdy and compact integration
on the motherboard.
module ensures robust, sturdy and compact integration
on the motherboard.
•
Antenna flexibility: available in 2 versions, with choice
between compact on-board chip antenna or external
antenna on the mother PCB.
between compact on-board chip antenna or external
antenna on the mother PCB.
Specifications and information herein are subject to change without notice.
indoor
outdoor
line-of-sight
range
40-100m 160-400m
1000m
Ubiwave
NV
UW-CM-08
(rev.
1.3)
1