Carlo Gavazzi Logistics SpA RAD02 ユーザーズマニュアル
1
Specifications are subject to change without notice. Pictures are just an example. For special features and/or customization, please ask to our sales network.
Safety Notes
Inside View
Cover Removing
Remove cover from behind, before installation.
After installation from the front side, insert the screwdriver in the provided slot.
RAD 01 To obtain wide
pattern L1 install the planar
antenna in vertical mode.
pattern L1 install the planar
antenna in vertical mode.
RAD 01
To obtain narrow
pattern L2 install the planar
antenna in horizontal mode.
antenna in horizontal mode.
RAD 02
To obtain wide
pattern L3 or L5 install the
planar antenna with tie clip.
planar antenna with tie clip.
RAD 02 To obtain
narrow
pattern L4 or L6 install planar
antenna without tie clip.
antenna without tie clip.
Motion Sensor Radar is a digital uni or bidirectional motion
sensor for trouble-free opening of all types of automatic doors
(sliding, swinging, folding, revolving, speed-doors, overhead
doors, etc...), for pedestrian and civil applications.
It can be adapted to every application without further
accessories and can be controlled by an infrared remote
controller. Mounting height up to 4m (13.12ft) also available in
uni- or bidirectional mode to detect motion towards or away from
the device. Like most of other microwave detectors, equipped
with planar flat antenna, Carlo Gavazzi Radar activates automatic
doors utilizing doppler shift effect for detecting movements.
sensor for trouble-free opening of all types of automatic doors
(sliding, swinging, folding, revolving, speed-doors, overhead
doors, etc...), for pedestrian and civil applications.
It can be adapted to every application without further
accessories and can be controlled by an infrared remote
controller. Mounting height up to 4m (13.12ft) also available in
uni- or bidirectional mode to detect motion towards or away from
the device. Like most of other microwave detectors, equipped
with planar flat antenna, Carlo Gavazzi Radar activates automatic
doors utilizing doppler shift effect for detecting movements.
Read Instructions!
Before working with this unit,
read these instructions carefully
and completely. Make sure that
you have understood all the
information!
Before working with this unit,
read these instructions carefully
and completely. Make sure that
you have understood all the
information!
Disconnect
system
from
supply network
Before
Before
any
installation,
maintenance or modification
work:
Disconnect your system from
the supply network. Ensure that
work:
Disconnect your system from
the supply network. Ensure that
cannot
be
re-connected
inadvertently!
Before
start
of
operation
ensure appropriate installation
Warning! Improper installation /
operation impair safety and
result in operational difficulties or
complete failure of the unit.
The unit must be installed and
put into service appropriately by
qualified personnel. Compliance
with the relevant regulations
must be ensured.
Warning! Improper installation /
operation impair safety and
result in operational difficulties or
complete failure of the unit.
The unit must be installed and
put into service appropriately by
qualified personnel. Compliance
with the relevant regulations
must be ensured.
© Copyright – Carlo Gavazzi - All rights reserved
This manual accompanies our equipment for use by the end users.
The technical instructions and illustrations contained in this manual are to be treated as confidential and no part may be reproduced without the prior written permission of Carlo Gavazzi
Service engineers and end users may not divulge the information contained herein or use this manual for purposes other than those strictly connected with correct use of the equipment.
Specifications are subject to change without notice. Pictures are just an example.
This manual accompanies our equipment for use by the end users.
The technical instructions and illustrations contained in this manual are to be treated as confidential and no part may be reproduced without the prior written permission of Carlo Gavazzi
Service engineers and end users may not divulge the information contained herein or use this manual for purposes other than those strictly connected with correct use of the equipment.
Specifications are subject to change without notice. Pictures are just an example.
With stranded wires: all strands
must be secured in the terminal
blocks (potential danger of short
circuit).
must be secured in the terminal
blocks (potential danger of short
circuit).
In operation: No modifications!
As long as the unit is in
operation: do not modify the
installation! The same applies
also to the secondary side.
• The unit must not be opened
except appropriately trained
personnel!
• Do not introduce any object
As long as the unit is in
operation: do not modify the
installation! The same applies
also to the secondary side.
• The unit must not be opened
except appropriately trained
personnel!
• Do not introduce any object
into the unit!
• Keep away from fire and water!
• Keep away from fire and water!
FCC warnings
This device complies with Part
15 of the FCC Rules. Operation
is subject to the following two
conditions:
1) this device may not cause
harmful interference, and
2) this device must accept any
interference received, including
interference that may cause
undesired operation.
This device complies with Part
15 of the FCC Rules. Operation
is subject to the following two
conditions:
1) this device may not cause
harmful interference, and
2) this device must accept any
interference received, including
interference that may cause
undesired operation.
User Manual
Motion Sensor
RAD