4RF Limited SRN0400025A ユーザーズマニュアル
120 | Managing the Radio
Aprisa SR User Manual
To distribute the payload security profile to remote stations:
This process assumes that a payload security profile has been setup (see ‘Security > Setup’ on page 109).
1. Click on ‘Start Transfer’.
Note: This process could take up to 1 minute per radio depending on channel size, Ethernet Management
Priority setting and the amount of customer traffic on the network.
Priority setting and the amount of customer traffic on the network.
3. When the distribution is completed, activate the software with the Remote Payload Security Profile
Activation.
REMOTE PAYLOAD SECURITY PROFILE ACTIVATION
When the security profile has been distributed to all the remote stations, the security profile is then
activated in all the remote stations with this command.
activated in all the remote stations with this command.
Predefined Profile Name
This parameter displays the predefined security profile available for activation on all remote stations.
To activate the security profile in remote stations:
This process assumes that a security profile has been setup into the base station (see ‘Security > Setup’ on
page 109) and distributed to all remote radios in the FAN.
page 109) and distributed to all remote radios in the FAN.
Note: Do not navigate SuperVisor away from this page during the activation process (SuperVisor can lose
PC focus).
PC focus).
1. Click Start Activation
The remote stations will be polled to determine which radios require activation: