Chuang Feng Electronics Co. Ltd. BLUEBOO ユーザーズマニュアル
规格材质：说明书148*105mm,105g双粉单黑印刷
Portable Bluetooth Speaker
BlueBoo
Instruction Manual
Included Items:
Speaker
Micro USB Charging Cable
Auxiliary/AUX Cord
Speaker
Micro USB Charging Cable
Auxiliary/AUX Cord
Charging Instructions:
1. Connect the Micro USB charging Cable to a USB
Port.
2. Red light indicates speaker is in charging mode.
3. No light indicates full charge complete.
4. Once fully charged, play time is approximately 3
hours.
Note: The speaker will beep when it is down to
10% power to indicate charging is needed.
1. Connect the Micro USB charging Cable to a USB
Port.
2. Red light indicates speaker is in charging mode.
3. No light indicates full charge complete.
4. Once fully charged, play time is approximately 3
hours.
Note: The speaker will beep when it is down to
10% power to indicate charging is needed.
Powering Speaker ON/OFF:
Press and hold the Power Button for 3 seconds to
power ON and OFF. When speaker is not in use,
power device off to preserve battery power.
Press and hold the Power Button for 3 seconds to
power ON and OFF. When speaker is not in use,
power device off to preserve battery power.
Pairing Your Device:
1. Press and hold the Power Button.
2. You will hear one beep and a blue light will start
flashing. Continue holding the Power Button and
wait for the second beep and the red/blue light to
begin flashing.
3. At this point the speaker is discoverable and
ready to pair to your device.
4. On your device, set your Bluetooth capability to
discoverable.
5. On your Bluetooth device list, select BlueBoo
(this is the name for all speakers).
6. Once paired, your device should link to the
speaker whenever in 30 foot range.
Note: Speaker can be paired with only one device
at a time.
1. Press and hold the Power Button.
2. You will hear one beep and a blue light will start
flashing. Continue holding the Power Button and
wait for the second beep and the red/blue light to
begin flashing.
3. At this point the speaker is discoverable and
ready to pair to your device.
4. On your device, set your Bluetooth capability to
discoverable.
5. On your Bluetooth device list, select BlueBoo
(this is the name for all speakers).
6. Once paired, your device should link to the
speaker whenever in 30 foot range.
Note: Speaker can be paired with only one device
at a time.
Playing music:
1. Turn on speaker and pair your device (see
previous sections).
1. Turn on speaker and pair your device (see
previous sections).
2. If previously paired, speaker will flash blue light
indicating that it is searching for your device.
3. Use your device to start play of music.
4. For Bluetooth paired mode, use arrows on
speaker to skip back and forth to navigate songs.
Use your device to control volume.
5. For Auxiliary mode, press and hold arrows to
control volume. Use your device to navigate songs.
indicating that it is searching for your device.
3. Use your device to start play of music.
4. For Bluetooth paired mode, use arrows on
speaker to skip back and forth to navigate songs.
Use your device to control volume.
5. For Auxiliary mode, press and hold arrows to
control volume. Use your device to navigate songs.
Micro USB charging port
Auxiliary Port
Power Button
Power Indicator Light
Volume/Next Button
Before using your speaker, connect to power
source and charge speaker. The initial charge
should take approximately 2-1/2 hours.
source and charge speaker. The initial charge
should take approximately 2-1/2 hours.
1203.0200.0003