Mitel Deutschland GmbH 68635RFP36U-01 ユーザーズマニュアル
SIP-DECT OM System Manual
200
1 Click Create in the Tasks menu of the Conference rooms page.
2 In the General tab, enter the conference room parameters.
2 In the General tab, enter the conference room parameters.
-
Name: Enter the SIP display name for the SIP account to be used.
-
Conference ID: Enter the SIP user id.
-
User name: Enter the SIP authentication name.
-
Password, Password confirmation: Enter the password that is required by the SIP server.
-
Fixed SIP port: Enter the port used explicitly for SIP signaling. If set to 0, an automatically
calculated port is used for this conference room. The default is 0. See section 3.7 for more
information on this feature.
information on this feature.
3 Click OK.
6.11.2 CONFIGURING CONFERENCE ROOMS
In
Configuration Mode you can configure an existing conference room.
1 Select the appropriate conference room entry in the conference rooms table.
2 Click Configure.
2 Click Configure.
The
General tab is displayed showing the current conference room configuration.
3 Change the conference room parameters as required.
4 Click OK.
4 Click OK.
6.11.3 DELETING CONFERENCE ROOMS
In
Configuration Mode, you can delete conference rooms.
1 Select one or more conference rooms entries in the conference rooms table.
2 Click Delete.
2 Click Delete.
A confirmation dialog appears.
3 Click OK to confirm.
6.11.4 VIEWING CONFERENCE ROOM DETAILS
In
Monitor Mode, you can view the details of a conference room.
1 Select the appropriate conference room entry in the conference room table.
2 Click Show details.
2 Click Show details.
The
General tab is displayed showing the conference room configuration.
3 Click Cancel to close the tab.
6.12 “SYSTEM FEATURES” MENU
The
System features menu provides the following entries: