Mitel Deutschland GmbH 68635RFP36U-01 ユーザーズマニュアル
SIP-DECT OM System Manual
308
Please note:
It is strongly recommended to set the DECT base station attributes “building”,
“floor” and “room”, if you configure a huge system with a large number of cameras. This
will ease the selection of cameras on the DECT phone menu.
will ease the selection of cameras on the DECT phone menu.
7.28.3 CAMERA SELECTION VIA HANDSET MENU
The selection of the menu “Cameras” is offered in the Mitel 600 DECT phone “System menu”
(e.g. long
press on Menu >>>), if
• at least one camera is plugged and activated by the enable flag
• the DECT phone user has the permission to select cameras
• the DECT phone is located within a site, which allows terminal video
• the DECT phone user has the permission to select cameras
• the DECT phone is located within a site, which allows terminal video
Navigation within the camera menu will be done by OK (and ESC) keys. To establish a video stream,
press “hook off” if the name of your camera is selected.
press “hook off” if the name of your camera is selected.
If the number of cameras exceeds the visible lines of the DECT phones display, the presentation is
arranged hierarchically. At least one sublevel must be selected in this case before camera names are
offered. The hierarchy of the referred radio fixed parts (site, building, …) is inherited for that purposes.
arranged hierarchically. At least one sublevel must be selected in this case before camera names are
offered. The hierarchy of the referred radio fixed parts (site, building, …) is inherited for that purposes.
The destination of a video call is added to the DECT phone internal redial list.
Please note:
During an established video link, audio calls or any system service activities
are not possible.
Any kind of auto callback (initiated by a message by a message or pushed by xml notification to direct
dial) is not supported.
dial) is not supported.
7.29 USER MONITORING
To check the availability of a user in terms of the possibility to receive calls or messages, the OMM
monitors the status of the user’s DECT device.
monitors the status of the user’s DECT device.
7.29.1 OVERVIEW
With the “user monitoring” feature the following fixed set of status information is monitored:
Is a DECT phone assigned to the user?
Handset assignment status (HAS)
Is the DECT phone subscribed to the DECT system?
Handset subscription status (HSS)
Is the DECT phone currently registered /signed in?
Handset registration status (HRS)
Are there DECT phone activities within a specific
timeframe?
timeframe?
Handset activity status (HCS)
Is the user registered at the SIP registrar?
SIP user registration status (SRS)
Is the DECT phone not in silent charging mode (silent
charging option active and in the charger cradle)?
charging option active and in the charger cradle)?
Silent charging status (SCS)
Is the feature “immediate call diversion” inactive?
Call diversion status (CDS)
Is the battery charge higher than the configured
threshold?
threshold?
Handset battery state (HBS)