Mitel Deutschland GmbH 68635RFP36U-01 ユーザーズマニュアル
OMM Web Service
55
•
System Name: Enter the system name.
•
Remote Access: Switches on/off the SSH access to all DECT base stations of the DECT system. For
more information on the SSH access see section 8.3.5.
•
Tone scheme: Select the country in which the OMM resides. This enables country specific tones
(busy tone, dial tone, etc).
5.4.1.2 DECT settings
•
PARK: This setting depends on the licensing mode. Small systems: Enter the PARK code obtained
from the PARK service (see section 4.1.3). License file: shows the PARK included in the license file.
•
DECT power limit 100mW: Limits the DECT base station transmit power to 100mW, independent of
the selected regulatory domain. Enable for SIP-DECT installations that are mobile (e.g., on cruise
liners that travel between countries). See section 3.32 for more information on this feature.
liners that travel between countries). See section 3.32 for more information on this feature.
•
Encryption: Activate this option if you want to enable DECT encryption for the whole system.
Please note:
Make sure that all deployed third party DECT phones support DECT
encryption. If not, encryption can be disabled per DECT phone (see 6.10.4).
•
Restrict subscription duration: Activate this option if you want to restrict the duration for DECT
phone subscriptions to 2 minutes after subscription activation. This option is not useful in case that
you want to subscribe more than one DECT phone at a time or together with auto-create on
subscription. It should be activated exclusively in case that there is a special need.
you want to subscribe more than one DECT phone at a time or together with auto-create on
subscription. It should be activated exclusively in case that there is a special need.
•
DECT monitor: For monitoring the DECT system behavior of the OpenMobility Manager, the
separate DECT monitor application exists. This tool needs an access to the OpenMobility Manager
which is disabled by default and can be enabled here. Because of security, the DECT monitor flag is
not stored permanently in the internal flash memory of the OMM/DECT base station. After a reset, the
DECT monitor flag is ever disabled.
which is disabled by default and can be enabled here. Because of security, the DECT monitor flag is
not stored permanently in the internal flash memory of the OMM/DECT base station. After a reset, the
DECT monitor flag is ever disabled.
•
Regulatory domain: Specifies where the IP DECT is used. Supported regulatory domains are:
- EMEA
- EMEA
- US (FCC/IC)
- Brazil
- Taiwan