Mitel Deutschland GmbH 68635RFP36U-01 ユーザーズマニュアル
Configuration and Administration
227
7.5.4 APPLICATION STARTUP
After successfully starting the application software, the RFP checks the local network settings in its
internal flash. If no settings are available or if they are disabled, it starts a DHCP client to determine the
IP address of the OMM and other application startup settings.
internal flash. If no settings are available or if they are disabled, it starts a DHCP client to determine the
IP address of the OMM and other application startup settings.
7.5.4.1 DHCP Client
The DHCP client is capable of receiving broadcast and unicast DHCP replies. Therefore the flags field is
The DHCP client is capable of receiving broadcast and unicast DHCP replies. Therefore the flags field is
0x0000
. The DHCP request contains the well-known magic cookie
(0x63825363)
and the end option
(0xFF)
.
Parameters
The following parameters will be supported within this step:
The following parameters will be supported within this step:
Option / Field
Meaning
Mandatory
yiaddr
IP address of the IP-RFP
yes
siaddr
Parameter named “Boot Server Host Name” with value
as the IP address of the TFTP server
as the IP address of the TFTP server
no (3G RFPs)
yes (older 2G
RFPs)
yes (older 2G
RFPs)
File
Parameter named “Bootfile Name” with value of the
path (optional) and name of the application image. For
example “iprfp3G.dnld “ (3
path (optional) and name of the application image. For
example “iprfp3G.dnld “ (3
rd
generation RFPs) or
“iprfp2G.tftp” (older 2
nd
generation RFPs).
no (3G RFPs)
yes (older 2G
RFPs)
yes (older 2G
RFPs)
option 1
Subnet mask
no
option 3
Default Gateway
no
option 6
Domain Name Server
no
option 15
Domain Name
no
option 42
IP address of a NTP server
no
option 43
Vendor Specific Options
yes
option 66
URL specifies the protocol, server and path to access
the RFP configuration files (see 7.7.7).
the RFP configuration files (see 7.7.7).
no
option 132
VlanId
no
option 150
TftpServerIpList
no
option 224
Parameter named magic_str must be set to value
"OpenMobility" or "OpenMobilitySIP-DECT".
"OpenMobility" or "OpenMobilitySIP-DECT".
yes