AxTech AB SBX-3 ユーザーズマニュアル
1
SOS
T
SOS
S
S
OS
OS
S
SO
SO
SO
S
SOS
SOS
S
S
S S
S
S
SO
SOS
C
1
4
7
*
2
5
8
0
3
6
9
#
SBX-3
English
INTRODUCTION
Thank you for your purchase of redKnows SBX-3 series product. In order to take full advan-
tage of this product, please read this manual carefully before starting to use the product.
tage of this product, please read this manual carefully before starting to use the product.
SBX-3 can be used for guarding many types of objects such as cars, boats, excavators,
containers, motorcycles, campervans and others. In this manual all objects are referred to
as “vehicles” or objects.
containers, motorcycles, campervans and others. In this manual all objects are referred to
as “vehicles” or objects.
SBX-3 is a GSM based positioning alarm. The alarm can be triggered by an alarm sensor
connected to one of the inputs or if the object is moved outside a defi ned area, so called
geofencing. When triggered the siren will sound and an SMS message will be sent to pre-
stored telephone numbers.
connected to one of the inputs or if the object is moved outside a defi ned area, so called
geofencing. When triggered the siren will sound and an SMS message will be sent to pre-
stored telephone numbers.
In addition to the alarm function, SBX-3 can also be used for tracking the position of an
object and control equipment with SMS.
object and control equipment with SMS.
The SBX-3 can only communicate with the prestored telephone numbers on the SIM card in
SBX-3. They can receive alarm SMS and control the alarm.
SBX-3. They can receive alarm SMS and control the alarm.
SBX-3
Mini Tracker
User and
Installation Manual
In the package you will fi nd:
Main unit with integrated GSM
module and spare battery.
module and spare battery.
GPS receiver
GSM antenna
Siren
Remote Control
Magnet Switch
Microphone
Cable kit
The units are installed according to the instructions in this manual and a SIM card is inser-
ted. Then the users telephone numbers has to be stored into the SIM-card in order to allow
access to the system.
ted. Then the users telephone numbers has to be stored into the SIM-card in order to allow
access to the system.
After this introduction the manual continues with instructions for handling the SBX-3 with
the remote controller and a mobile phone, once it is installed an initialised.
the remote controller and a mobile phone, once it is installed an initialised.
The installation should be made by a person with proper knowledge of the electrical system
of the object. Instructions are found in the Installation Manual.
When the system is installed a SIM card is inserted and power is applied. Then the SIM
card should be prepared with the proper settings, this is described in the Setup Manual.
of the object. Instructions are found in the Installation Manual.
When the system is installed a SIM card is inserted and power is applied. Then the SIM
card should be prepared with the proper settings, this is described in the Setup Manual.
© AxT
ech AB 2006