NEC Nederland B.V. AP300E-001 ユーザーズマニュアル
March 2010
AP300 Customer Engineer Manual
11
All rights reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner
6.
Mount the G.729 Daughter Board onto the main PWB. Push the Daughter Board
carefully onto the main board. The white connector should fit well. Make sure that the
sticky part sticks to the Main Board.
carefully onto the main board. The white connector should fit well. Make sure that the
sticky part sticks to the Main Board.
Figure 11. Mounting the G.729 Daughter Board onto the Main board.
Figure 12. G.729 Daughter Board on the Main Board
7.
Put the AP300 together in the opposite way, mounting the PWB into the cabinet and
assembling the cabinet. Do not forget to mount the two screws back into the rear side
of the cabinet.
assembling the cabinet. Do not forget to mount the two screws back into the rear side
of the cabinet.