Aten KH1508A DCP2944 クイック設定ガイド

1

2

3

4

5-1

5-2

1 KH1508

A

 or KH1516

A

 Cat 5 High-Density KVM Switch

1 Firmware Upgrade Cable

1 Power Cord

1. Port Selection Pushbuttons

2. Port LEDs

3. Reset Switch

4. Firmware Upgrade Recovery Switch

5. Firmware Upgrade Port

6. Power LED

7. Station ID LED

1. Power Socket 

2. Power Switch

3. Daisy Chain Ports

4. Grounding Terminal

5. Console Ports

6. KVM Port Section

• A VGA, SVGA, or multisync monitor capable of the highest resolution that you will be using on any computer in 

the installation

• A PS/2 or USB mouse

• A PS/2 or USB keyboard

The following equipment must be installed on the computers that connect to the KH1508

A

 or KH1516

A

 KVM 

ports:

• A VGA, SVGA or multisync port

• A Type A USB port and USB host controller (for USB KVM adapter cable connection, see following section)

- or -

• 6-pin Mini-DIN keyboard and mouse ports (for PS/2 KVM adapter cable connection, see following section)

• Cat 5e/6 cable is required to connect the KH1508

A

 / KH1516

A

 to one of the KVM adapter cables.

• The following KVM adapter cables are required for use with the KH1508

A

 / KH1516

A

:

1. Ground the KH1508

A

 / KH1516

A

 by connecting one end of the grounding wire to the grounding terminal, and 

the other end of the wire to a suitable grounded object.

Note: Do not omit this step. Proper grounding helps to prevent damage to the unit from surges or static 

electricity.

2. Plug the console keyboard, monitor, and mouse into the unit’s console ports. The ports are color coded and 

marked with icons for easy identification.

Note: You can use any combination of keyboard and mouse connections. For example, you can use a PS/2 

keyboard with a USB mouse.

3. Use Cat 5e/6 cable to connect any available KVM port to a KVM adapter cable that is appropriate for the 

computer you are installing.

Note: To support a resolution of 1280x1024, the recommended maximum distance between the unit and the 

KVM adapter cable is 50 meters.

4. Connect the KVM adapter cable to the computer. Plug the connectors on the KVM adapter cable into the 

appropriate ports of the computer you are installing.

5. Plug the female end of the power cord into the KH1508

A

 / KH1516

A

's power socket; plug the male end into an 

AC power source.

After the KH1508

A

 / KH1516

A

 is cabled up, you can turn on the power. After it is powered up, you can turn on the 

servers.

The KH1508

A

 / KH1516

A

 can be mounted in a 19" (1U) rack. The mounting brackets can screw into either the front 

or the back of the unit so that it can attach to the front or the back of the rack. To rack mount the unit:

1. Remove the screws at the front or the rear, as shown in the diagram below.

2. Screw the mounting brackets into the sides of the unit at the front or the rear, as shown in the diagram below.

3. Slide the unit into the front or rear of the rack and secure it to the rack.

Connect to devices with PS/2 ports  

KA7920 / KA7520 / KA7120 / KA9520 / KA9120 

Connect to devices with USB ports  

KA7970 / KA7570 / KA7170 / KA9570 / KA9170 

Connect to Sun Legacy systems (with 13W3 port)  

KA9130 / KA7130 

Connect to Sun USB systems  

KA9170 / KA7170 

Connect to serial based devices  

KA9140 

Note: The front and rear panel views are similar for the KH1508

A

, the difference being that the 

KH1508

A

 has only one row of LED lights (front) and one row of CPU ports (rear)

Phillips head hex

M3 x 8

Phillips head hex

M3 x 6

Phillips head hex

M3 x 6

(KH1516

A

)

(KH1516

A

)

© Copyright 2012 ATEN

®

 International Co., Ltd.   www.aten.com

Altusen and the Altusen logo are trademarks of ATEN International Co., Ltd. 
All rights reserved. All other trademarks are the property of their respective owners.
This product is RoHS compliant    

All information, documentation, and specifications contained in this media are subject to change without prior notification by the manufacturer. 
Please visit our website to find the most up to date version. 

Online Registration
• http://eservice.aten.com  

 
Technical Phone Support
International:
• 886-2-8692-6959
China:
• 86-10-5255-0110
Japan:
• 81-3-5615-5811
Korea:
• 82-2-467-6789
North America:
• 1-888-999-ATEN   Ext: 4988  
United Kingdom:
• 44-8-4481-58923

1 Mounting Kit

1 Foot Pad Set (4 pcs.)

1 User Instructions

Considering environmental protection, ATEN may not provide a fully printed user manual for this product. If the 

information contained in the Quick Start Guide is not enough for you to configure and operate your product, please visit 

our website www.aten.com, and download the full user manual.