RLW Inc. RLW88844422 ユーザーズマニュアル

wSIM™ FAE WiTry Kit Operation Quick Start Guide

5. Enter the following configuration, see Figure 3-2.

i. IP address: 192.168.99.101

ii. Subnet mask: 255.255.255.0

iii. Default gateway: 192.168.99.1

Figure 3-2: Configuring the static IP address

6. Click OK to exit the Internet Protocol (TCP/IP) Properties window

7. Click OK to exit the Local Area Connection Properties window

The System 1 PC is now properly configured to interact with the WiTry System.

3.1.2 wSIM Mesh Network Gateway Configuration

To establish the 802.15.4 network, configure the wSIM Mesh Network Gateway.

1. Power on the Gateway – Wait 1 minute while the wSIM Mesh Network

Gateway runs its startup procedure (software on the Gateway).

2. On the System 1® PC, double click the Smart Mesh Console 1.6 Icon on

the Desktop

3. Power on each wSIM by flipping the switch from Off to On.

4. After the Smart Mesh Console starts >> Click the Console Menu >>

Discover Managers

5. In the Discover Managers window >> Click the Discover Icon, see Figure

3-3.