RLW Inc. RLW88844422 ユーザーズマニュアル

Operation Quick Start Guide 

 

19

a.  Select the existing Enterprise you want to configure for the WiTry™ 

demonstration, or create a new one. 

3. Click <<Connect>> 

4.  After the Enterprise opens >>From the Tools Menu >> select Template 

Import / Export 

5.  In the Template Import / Export Window >> Click the Import Radio 

Button 

6. Click <Browse> 

7.  In the Open window >> Navigate to USB:\WSIM WITRY\Templates 

8.  Select wSIM Released Templates, see Figure 4-1. 

 

Figure 4-1: wSIM System 1® Template Installation 

9.  Click <Open> to load the templates into System 1® 

10. In the Do you wish to continue pop-up, click <Yes> 

11. Wait while changes to the Enterprise are saved. 

12. Close Template Import / Export Window by clicking <Close> 

4.1.2 Create Modbus Devices in System 1® 

To enable wSIM data to be entered into System 1®, four (4) Modbus Devices 

must be created in the System 1® Configuration application.  Three (3) devices 
will be configured using the wSIM Node Template and one (1) device will be 
configured using the wSIM Network Statistics template.