EDATA COMMUNICATIONS INC. DSL-2140W ユーザーズマニュアル

   

The following table describes the labels in this screen. 

 

 

SSID Index, SSID 

The SSID is the unique name of a wireless access point 

(AP) to be distinguished from another. For security 

propose, change the default name to a unique ID name 

to the AP which is already built-in to the router’s 

wireless interface. It is case sensitive and must not 

excess 32 characters. Make sure your wireless clients 

have exactly the SSID as the device, in order to get 

connected to your network. 

Broadcast SSID 

Select Yes to hide the SSID in so a station cannot 

obtain the SSID through passive scanning. Select No to 

make the SSID visible so a station can obtain the SSID 

through passive scanning. 

Type 

To prevent unauthorized wireless stations from 

accessing data transmitted over the network, the router 

offers highly secure data encryption, known as 

WEP.&WPA. If you require high security for 

transmissions, there are two alternatives to select from: 

64-bit WEP and 128-bit WEP. WEP 128 will offer 

increased security over WEP 64. 

You can disable or enable with WPA or WEP for 

protecting wireless network. The default type of 

wireless is disabled and to allow all wireless computers 

to communicate with the access points without any data 

encryption 

 

 

Users are able to configure the router to give exclusive access to up to 8 

devices or exclude up to 8 devices from accessing the router through the MAC 

filter screen . MAC (Media Access Control) address is a number that acts like a 

Proprietary & Confidential 

Page 33 of 80 

Revision: V1.0 

 

Jan. 19 2008