Arcadian Networks Inc. V390I ユーザーズマニュアル
3 Installing the V390i
24
V290iA User Guide
Pole Mounting Procedure
The following steps describe how to mount the V390i on a pole. The callouts in the
figures below refer to the numbered items in Table 1 on page 18.
figures below refer to the numbered items in Table 1 on page 18.
To mount the V390i on a pole:
1. Attach a ground wire with a ring terminal to the grounding screw, shown in
Figure 15. Perform the following:
a. Unscrew the grounding screw (a ¼” screw with a spring washer and flat washer)
from the V390i chassis.
b. Thread the ring onto the grounding screw.
c. Screw the grounding screw back into place, so that the ring is pressed between
the flat washer and the V390i chassis.
Figure 15: Attaching to Ground
d. Attach the other end of the ground wire to GND.