Accton Wireless Broadband Corp. FIU176205000W ユーザーズマニュアル

ページ / 134
A-1
Appendix A: Troubleshooting
Check the following items before you contact local Technical Support.
1.
If wireless clients cannot access the network, check the following:
• Be sure the access point and the wireless clients are configured with the same 
Service Set ID (SSID).
• If authentication or encryption are enabled, ensure that the wireless clients are 
properly configured with the appropriate authentication or encryption keys.
2.
If the wireless AP/Router cannot be configured using a web browser:
• Be sure to have configured the access point with a valid IP address, subnet 
mask and default gateway.
• If you are connecting to the wireless AP/Router through the wired Ethernet 
interface, check the network cabling between the management station and the 
wireless AP/Router. If you are connecting to wireless AP/Router from a 
wireless client, ensure that you have a valid connection to the wireless AP/
Router.
3.
If you forgot or lost the password:
• Set the wireless AP/Router to its default configuration by pressing the reset 
button on the bottom panel for 5 seconds or more. Connect to the web 
management interface using the default IP address 192.168.2.1. Then set up 
a new user name and password to access the management interface.
4.
If all other recovery measure fail, and the wireless AP/Router is still not 
functioning properly, take any of these steps:
• Reset the wireless AP/Router’s hardware using the web interface or through 
a power reset.
• Reset the wireless AP/Router to its default configuration by pressing the reset 
button on the back panel for 5 seconds or more. Connect to the web 
management interface using the default IP address 192.168.2.1, then setup a 
user name and password.