Accton Wireless Broadband Corp. FIU176205000W ユーザーズマニュアル
System Configuration
5-6
5
Common Settings
Common Settings are the same for each WAN settings. This section describes the
common parameters.
common parameters.
Figure 5-4 WAN Common Settings (Router Mode)
WAN Ethernet Speed — Configures the WAN Ethernet connection speed.
(Default: Auto-Negotiated)
• Auto-Negotiated – Enables auto-negotiation.
• 100Mbps, Full-Duplex – Forces 100 Mbps full-duplex operation.
• 100Mbps, Half-Duplex – Forces 100 Mbps half-duplex operation.
• 10Mbps, Full-Duplex – Forces 10 Mbps full-duplex operation.
• 10Mbps, Half-Duplex – Forces 10 Mbps half-duplex operation.
(Default: Auto-Negotiated)
• Auto-Negotiated – Enables auto-negotiation.
• 100Mbps, Full-Duplex – Forces 100 Mbps full-duplex operation.
• 100Mbps, Half-Duplex – Forces 100 Mbps half-duplex operation.
• 10Mbps, Full-Duplex – Forces 10 Mbps full-duplex operation.
• 10Mbps, Half-Duplex – Forces 10 Mbps half-duplex operation.
WAN Ethernet MAC — Some ISPs limit Internet connections to a specified MAC
address of one PC. This setting allows you to manually change the MAC address of
the wireless AP/Router's WAN interface to match the PC's MAC address provided to
your ISP for registration. You can enter the registered MAC address manually by
typing it in the boxes provided. Otherwise, connect only the PC with the registered
MAC address to the wireless AP/Router, then click the “MAC Clone.” (Default:
Original MAC)
address of one PC. This setting allows you to manually change the MAC address of
the wireless AP/Router's WAN interface to match the PC's MAC address provided to
your ISP for registration. You can enter the registered MAC address manually by
typing it in the boxes provided. Otherwise, connect only the PC with the registered
MAC address to the wireless AP/Router, then click the “MAC Clone.” (Default:
Original MAC)
Note: If you are unsure of the PC MAC address originally registered by your ISP, call
your ISP and request to register a new MAC address for your account. Register
the default MAC address of the wireless AP/Router.
the default MAC address of the wireless AP/Router.
• Original MAC – Specifies a preset MAC address to uniquely identify the unit.
• Manual Setting – Configures a specific MAC address to use for the WAN
• Manual Setting – Configures a specific MAC address to use for the WAN
connection.
• Ping from WAN – Sends a ping from the wireless AP/Router to the WAN
connection to test for connectivity.
• Set DNS Server – Allows manual or automatic selection of DNS severs.
• Primary DNS Server: The IP address of the Primary Domain Name Server on the
• Primary DNS Server: The IP address of the Primary Domain Name Server on the
network. A DNS maps numerical IP addresses to domain names and can be used