Accton Wireless Broadband Corp. FIU176205000W ユーザーズマニュアル
System Configuration
5-42
5
- Edit: Click "Edit" to highlight an entry in the static MAC list for changing its
parameters.
- Delete: Deletes a static route from the list.
Dynamic Route
The wireless AP/Router supports RIP 1 and RIP 2 dynamic routing protocol. Routing
Information Protocol (RIP) is the most widely used method for dynamically
maintaining routing tables. RIP uses a distance vector-based approach to routing.
Routes are chosen to minimize the distance vector, or hop count, which serves as a
rough estimate of transmission cost. Each router broadcasts its advertisement every
30 seconds, together with any updates to its routing table. This allows all routers on
the network to build consistent tables of next hop links which lead to relevant
subnets.
Information Protocol (RIP) is the most widely used method for dynamically
maintaining routing tables. RIP uses a distance vector-based approach to routing.
Routes are chosen to minimize the distance vector, or hop count, which serves as a
rough estimate of transmission cost. Each router broadcasts its advertisement every
30 seconds, together with any updates to its routing table. This allows all routers on
the network to build consistent tables of next hop links which lead to relevant
subnets.
Figure 5-28 Dynamic Route (Router mode)
• WAN Interface – Specifies RIP1, RIP2, RIP1/RIP2, or disables the function for the
WAN interface.
• LAN Interface – Specifies RIP1, RIP2, RIP1/RIP2, or disables the function for the
LAN interface.