Accton Wireless Broadband Corp. FIU176205T01W ユーザーズマニュアル

  |  Installing the Gateway Router

Mounting on a Horizontal Surface

–  35  –

To keep the Wireless Broadband Router from sliding on the surface, the 

Wireless Broadband Router has four rubber feet on the bottom of the unit.

It is recommended to select an uncluttered area on a sturdy surface, such 

as a desktop or table. The unit can also be protected by securing all 

attached cables to a table leg or other nearby fixed structure.

In its default Gateway Mode, the Wireless Broadband Router forwards 

traffic between an Internet connected cable or ADSL modem, and wired or 

wireless PCs or notebooks. The basic connections are illustrated in the 

figure below.

To connect the Wireless Broadband Router in Gateway Mode for use as an 

Internet gateway, follow these steps:

Connect an Ethernet cable from the Wireless Broadband Router’s WAN 
port to your Internet connected cable or ADSL modem.

Connect an Ethernet cable from the Wireless Broadband Router’s LAN 
ports to your PCs. Alternatively, you can connect to a workgroup switch 

to support more wired users. The Wireless Broadband Router can 

support up to 253 wired and wireless users.

Power on the Wireless Broadband Router by connecting the AC power 
adapter and plugging it into a power source.

4.

Set up wireless
devices

Notebook PC

3.

Connect AC power
adapter to
power source

2.

Connect LAN port
to PC

Cable/DSL Modem

1.

Connect WAN port to
cable/DSL modem

Internet