HARRIS CORPORATION TR-0011-A ユーザーズマニュアル

ページ / 29
7
OPERATING RULES AND REGULATIONS
Two-way FM radio systems must be operated in accordance with the
rules and regulations of the local, regional, or national government.
In the United States, the P
ANTHER
 300M mobile radio must be
operated in accordance with the rules and regulations of the Federal
Communications Commission (FCC). As an operator of two-way
radio equipment, you must be thoroughly familiar with the rules that
apply to your particular type of radio operation. Following these rules
helps eliminate confusion, assures the most efficient use of the
existing radio channels, and results in a smoothly functioning radio
network.
When using your two-way radio, remember these rules:
  It is a violation of FCC rules to interrupt any distress or
emergency message. As your radio operates in much the same
way as a telephone "party line", always listen to make sure that
the channel is clear before transmitting. Emergency calls have
priority over all other messages. If someone is sending an
emergency message - such as reporting a fire or asking for help
in an accident - KEEP OFF THE AIR!
 
The use of profane or obscene language is prohibited by Federal
law.
 
It is against the law to send false call letters or false distress or
emergency messages. The FCC requires that you keep
conversations brief and confine them to business. To save time,
use coded messages whenever possible.
  Using your radio to send personal messages (except in an
emergency) is a violation of FCC rules. You may send only
those messages that are essential for the operation of your
business.
  It is against Federal law to repeat or otherwise make known
anything you overhear on your radio. Conversations between
others sharing your channel must be regarded as confidential.
  The FCC requires that you identify yourself at certain specific
times by means of your call letters. Refer to the rules that apply
to your particular type of operation for the proper procedure.
  No changes or adjustments shall be made to the equipment
except by an authorized or certified electronic technician.