Industrial Scientific Corporation RGX ユーザーズマニュアル

 

22 

There are several values unique to each RGX, as noted below, which will be required for various setup 
scenarios.  

Side (right) 

 

Case base 

 

Serial number (S/N) 
Required for unit activation.  

 

Activation code 
Required for unit activation.  

 

MAC addresses (on label) 
Required for Ethernet configuration and permanent 
installations.

 

IP Address 
Note: If the value is unknown to you, see your network 
administrator who may need the unit's MAC address. 

For some tasks, a default static IP is supplied.  

User name

   

The default value is RGXadmin (case sensitive).  

Figure 3.1 Required setup values 

Activation 

RGX Gateway  

Activation of the RGX is required to enable wireless data exchange between the unit and iNet®, which is 
fundamental to the live-monitoring features of iNet Now. 
To activate the unit, you will need the following.  
x  Access to iNet.    

x  RGX Serial Number (S/N), which is located on the right side of the unit. 

x  RGX Activation Code (A/C), which is located on the right side of the unit. 
Log into iNet and follow this navigation. 
x  Click on the Equipment tab. 

x  Choose Activate New Equipment. 

x  In the provided fields, enter the unit's Serial Number and Activation Code.  

x  Use the OK button to enter the information.  

Gas-detection instruments 

For gas-detection instrument data to make the wireless journey from instrument to RGX to iNet and onto 
the users of iNet Now, the instruments must be activated for live monitoring. The following are required.   
x  Access to iNet.    

x  The Serial Number (S/N) for each instrument to be monitored.  

Modified: 2018-05-25 13:18:14 EDT

Drawn By: Gaygan, Nancy

Created: 2018-05-16 10:24:51 EDT

Rev: 1

Printed By: Kuzmich, Bob

Int: 1.5

Date:May 29, 2018