Intel P4304BTSSFCN ユーザーズマニュアル
Monthly Specification Update
Enterprise Platforms and Services Marketing
4
Errata
1.
Bios setting is locked after running 'syscfg/bldfs' to load Bios default
setting
setting
Problem
The user uses “syscfg/bldfs” to load BIOS default setting, the BIOS setting
is locked.
is locked.
Implication
The user can’t change the BIOS setting after the user uses “syscfg/bldfs” to
load BIOS default setting on Intel
load BIOS default setting on Intel
®
Server Board S1200BTL.
Status
This issue is fixed in BIOS Revision 24.
Workaround
The user can use CMOS clear to clear the settings and reboot the system, after
that the BIOS setting can work.
that the BIOS setting can work.
2.
Admin Password is cleared after loading user defaults
Problem
Set admin password by using syscfg command “syscfg/bap”, “int123”, and then
load user default setting by using “syscfg/bldfs”, reboot the system to enter into
BIOS setup, the password is not shown.
load user default setting by using “syscfg/bldfs”, reboot the system to enter into
BIOS setup, the password is not shown.
Implication
After the user sets the password using the “syscfg” utility, the password does
not prompt the user after the first reboot on Intel
not prompt the user after the first reboot on Intel
®
Server Board S1200BTL.
Status
This issue is fixed in BIOS Revision 24.
Workaround
Reboot the system twice, the admin password will be shown.
3.
LSI* SCSI storage card 20320 can't enter into Microsoft Windows 2008*
R2
R2
Problem
When using the LSI* SCSI storage card 20320, the system can’t enter into
Microsoft Windows 2008* R2. It hangs on the error “Info: An error occurred
while attempting to read the boot configuration data”.
Microsoft Windows 2008* R2. It hangs on the error “Info: An error occurred
while attempting to read the boot configuration data”.
Implication
The user can’t use LSI* SCSI storage card 20320 on the Intel
®
Server Boards
S1200BTL.
Status
This issue is fixed in BIOS Revision 24.
Workaround
None.