Contec DS110-APL ユーザーズマニュアル
Setup
FX-DS110-APL
17
Using the Magnets (Included)
The magnets included with this product can be used for easy
mounting and removal on steel desks, partitions, or other metal
surfaces.
mounting and removal on steel desks, partitions, or other metal
surfaces.
Notes!
・ Do not place magnets near monitors, floppy disks, or other
sensitive objects.
・ Moving the AP while it is mounted on a steel desk or similar
surface can cause paint scratching.
Attaching and Removing Magnets
To mount the unit using a magnet, push the magnet into the magnet
mounting hole in the direction of arrow 1 as shown in Figure 4.2. ,
then insert the entire magnet into the mounting hole.
mounting hole in the direction of arrow 1 as shown in Figure 4.2. ,
then insert the entire magnet into the mounting hole.
Next, slide the magnet in the direction of arrow 2 to hold the unit in
place.
place.
To remove, slide the magnet in the direction of arrow 1 in Figure
4.3. , then lift in the direction of arrow 2.
4.3. , then lift in the direction of arrow 2.
Magnet
Magnet mounting holes
Figure 4.2. Attaching Magnets
Figure 4.3. Removing Magnets