Pinetron Co. Ltd. PDC-101 ユーザーズマニュアル
1. Installation of Hardware
1. In order to be prepared for emergencies, completely cut off the power
connected to PC and auxiliary connection devices.
2. Open the PC case. Every manufacturer has the different shape and type
of PC cases.
3. Connect the RakerDV IEEE 1394 board on PCI slot.
Tighten up the screw to fix the bracket of board.
4. Reassemble the PC case.
2. Installation of IEEE-1394 Driver
2.1 Installation of Driver for Windows 98 / 98SE / 2000 / ME
1. Turn on the PC power. When Windows is started, the new hardware is
1. Turn on the PC power. When Windows is started, the new hardware is
automatically detected and the wizard dialogue to add new hardware is
displayed. Click “Next” button.
displayed. Click “Next” button.
2. After selecting “Search the most adequate driver (recommended)”, click
“Next” button.
3. Windows will detect the location where the newly added hardware
driver is. Choose “CD-ROM Drive” and insert Windows CD-ROM. Then
click “Next” button.
click “Next” button.
4. Now installation of the selected driver is ready. Click “Next” button.
DV Board
PCI Bus Slot