Avitec AB FD-3100A ユーザーズマニュアル

 

 
Once the fiberoptic cable has been installed properly, the FiberDAS installation and set up is simple. 
 

2.5.1  Inspect Received Items 

Inspect all received items thoroughly. If any item has been damaged during shipping, report it to the 
shipping company and to Remec in the U. S. at 408-747-1946.  Also, contact the factory immediately 
if any item is missing. 

 
Packing List Checklist (as applicable) 
 

 

Hub Shelf w/mounting hardware and AC power cord 

 

Hub Transceiver Plug-In (s); these are installed in the chassis unless they are spares 

 

Plug-In Termination Cards: these are plug-ins behind blank front panels installed on unused slots. 
They provide 50

Ω RF terminations to the internal RF splitters and combiners ensuring a balanced 

load. 

 

Two 1:2 RF splitter/combiners (supplied with the Hub Shelf) 

 

Remote Transceiver (s): These will be in a separate box. 

 

Remote Power Supplies (not included if user is supplying DC power to Remote Transceiver). 

 

Mounting Brackets for Remote Transceiver and Remote Power Supply. Included with Remote 
Transceiver and Remote Power Supply. 

 

1 Operating Manual 

 

2.5.2 Recommended Tools 

 

 

Fiberoptic Connector Cleaning Kit: For the SC/UPC: cotton swabs, alcohol  

 

IR sensitive card: used to detect active laser port and active fiber. (eg. Quantex  Model Q-42-R) 

 

Small screwdriver or Adjustment Tool for transmit output power rotary DIP switch 

 

Screwdriver for mounting chassis in rack and Remote Transceivers on the wall 

 

4 #6 panhead or M3.5 mounting screws for each Remote Transceiver. 

 

Appropriate screws, washers and mounting hardware for rack mounting the Hub Shelf. 

2.6.1 Rack Installation 

The Hub Shelf mounts in a standard 19 inch rack close to the RF source (BTS or repeater). The chassis 
should be supported at the sides as well as from the front flanges. The Hub Shelf 3U high chassis is also 
available with rails as an option.  

front mounting ears only. 

 

2-9