Memorex Products Inc. MX4350RF-1 ユーザーズマニュアル

To use the Memorex cordless optical mouse with your PC, you will need to have a free USB port or PS2 mouse port.
The USB port or PS2 mouse port can be recognized on most modern computers by a symbol next to the
corresponding socket.

1.  Connection to your PC

a.  Shut down your PC and turn it off

b.  Disconnect any existing mouse completely and then gently insert the PS2 connector of your Memorex 

receiver cable directly into the mouse port of your PC

a.  Connect the PS2 to USB adapter to the PS2 plug of the receiver

b.  Disconnect any existing mouse completely and then gently insert the USB connector of your Memorex

receiver cable directly into the USB port of your PC

2. Connect the Mouseport

TM

to the mains power supply using the supplied power cable and ensure the power is

turned on. The LED at the front of the Mouseport

TM

should be on.

3. Open the battery compartment of the mouse and set the mouse ID with the channel switch to either “1” or “2” 

4. Insert the 2 rechargeable AAA batteries into the battery compartment and close the cover. Take care to insert the

batteries correctly. Position the mouse onto the Mouseport

TM

charging station so that it is in the charging position.

The first time you charge the mouse, to allow the batteries to charge completely you should allow it stand in the
Mouseport

TM

for 8 hours. When you start charging, the Mouseport

TM

LED will be on. As charging of the batteries

nears completion, the LED will start to flash with increasing speed until the batteries are fully charged, when the
LED will go off.

5. Locate the channel switch on the bottom of the receiver and set the receiver ID to be the same as selected for

the mouse in step 2 above. The default setting for both is channel 1.