CCP Co. Ltd. 3701-TX24 ユーザーズマニュアル
8
8
8
Setting Up Your Controller
Installing the Battery
Your controller needs a 9V battery (not included). We recommend 9V alkaline batteries for best performance.
1.
1.
Make sure the power switch is OFF, and remove the screw on the battery compartment.
2.
Place the 9V battery in the compartment, matching the polarity symbols (+ and –) marked inside.
3.
Snap the cover back in place and replace the screw.
Battery Notes:
UÊ When you notice the LED is off or the range of your car decreases, replace the battery.
UÊ Dispose of old batteries promptly and properly. Do not burn or bury batteries.
UÊ Use only fresh batteries of the required size and recommended type.
UÊ If you do not plan to use the vehicle for several days, remove the battery. Batteries can leak chemicals that
UÊ Dispose of old batteries promptly and properly. Do not burn or bury batteries.
UÊ Use only fresh batteries of the required size and recommended type.
UÊ If you do not plan to use the vehicle for several days, remove the battery. Batteries can leak chemicals that
can destroy electronic parts.
Pairing Your Controller and the Car
Your XMODS operates at a frequency of 2.4Ghz. Before driving the first time, you must pair the controller and car.
1.
1.
Turn on the controller.
2.
Turn on the car (The power switch is under the chassis). The LED indicator on the car flashes slowly.
3.
Press and hold the car pairing button for 3 seconds; the car LED flashes quickly. When the car LED stops
flashing, pairing is complete.
Note:
UÊ Your car and controller remain paired for future use, even when batteries are removed from the controller or
UÊ Your car and controller remain paired for future use, even when batteries are removed from the controller or
the car.
UÊ If the pairing failed, turn off the controller and the car, move closer, and then try again.
6000939_UG_EN 062013.indd 8
6/21/2013 1:17:22 PM