Yung International Inc CERAMIC-BT ユーザーズマニュアル
Bluetooth Receiver
Designed by Joey Roth, 2013
Setup:
The box in front of you should contain:
b
Power supply
c
Cables
-RCA interconnects
-Power cord
-Power cord
If any of these parts are missing or appear damaged,
please email service@joeyroth.com before proceeding.
© 2013 Joey Roth Design Studio
a
Bluetooth receiver
1. Connect the Bluetooth receiver’s LINE OUT to
the speaker amp’s or subwoofer’s LINE IN
the speaker amp’s or subwoofer’s LINE IN
2. Connect one end of the power cord to the DC
5V jack on the Bluetooth receiver, and the other
end to a wall outlet or powered USB port.
5V jack on the Bluetooth receiver, and the other
end to a wall outlet or powered USB port.
3. Switch on the Bluetooth receiver and wait for
the front LED to start blinking blue and red
the front LED to start blinking blue and red
4. Enable Bluetooth on your device of choice and
link it to the Bluetooth receiver, which will be
called CERAMIC SPEAKER SYSTEM on the list
of available devices.
link it to the Bluetooth receiver, which will be
called CERAMIC SPEAKER SYSTEM on the list
of available devices.
5. Make sure the speaker and subwoofer amps are
both turned on, and begin playing music
wirelessly
both turned on, and begin playing music
wirelessly
If you have any questions about setting up or
using your Bluetooth receiver, please contact us at
using your Bluetooth receiver, please contact us at
service@joeyroth.com