Arescom Inc. AG1000PRO ユーザーズマニュアル
CONFIGURING YOUR ROUTER
20
AresGate 1000 User’s Installation Guide
PPPoE
A. Click the PPPoE tab on the top.
The PPP Over Ethernet page needs to be filled out by xDSL modem
users whose ISPs are using this protocol. To know whether you need
to select this option, please try connecting the Internet. If you are
required to enter a username and password during a dial-up session,
then you are already using PPPoE and therefore will need to enable
this feature on the SETUP page.
users whose ISPs are using this protocol. To know whether you need
to select this option, please try connecting the Internet. If you are
required to enter a username and password during a dial-up session,
then you are already using PPPoE and therefore will need to enable
this feature on the SETUP page.
Username:
The name of the Internet account
provided by your ISP.
provided by your ISP.
Password:
The password you use to access your
ISP account.
ISP account.
NAT:
Enabling the NAT (Network Address
Translation) function allows the router to
perform IP-sharing, which means
multiple PCs on your LAN with private IP
addresses can share Internet access
using one public IP Address.
Disable the NAT function if you are not
planning to use the AresGate router for
shared Internet access.
Translation) function allows the router to
perform IP-sharing, which means
multiple PCs on your LAN with private IP
addresses can share Internet access
using one public IP Address.
Disable the NAT function if you are not
planning to use the AresGate router for
shared Internet access.
B. To establish a PPPoE broadband connection, enter these
values and click the Connect button. To disconnect an
existing PPPoE connection, click the Disconnect button.
existing PPPoE connection, click the Disconnect button.
NOTE:
Once you click the Connect button, your xDSL service is
activated and always ON. To surf the Internet, you are not required to run
the PPPoE program originally running on your PC.
the PPPoE program originally running on your PC.