Arescom Inc. ND1760 ユーザーズマニュアル
SOFTWARE INSTALLATION & CONFIGURATION
10
NetDSL 1700 Version 5.2 Get Started User’s Guide
Configuring TCP/IP in Windows
®
95OSR2/98/Me
Step 1. From the Configuration tab, select TCP/IP -> XXXX Ethernet
Adapters (“XXXX” is the maker of your Ethernet card) listed
under Network Components and click Properties.
under Network Components and click Properties.
Step 2. Select the IP Address tab.
You now have the option of using
either dynamic or static IP
addressing.
either dynamic or static IP
addressing.
To enable dynamic IP
addressing:
addressing:
Step 1. Click the radio button next to
Obtain an IP Address
automatically.
automatically.
OPTIONAL: Click the DNS Configuration tab and select Disable DNS. If
you previously entered any parameters, clear all pre-existing settings.*
you previously entered any parameters, clear all pre-existing settings.*
Step 2. Select the Gateway tab.
Step 3. Click Remove to clear all
pre-existing settings.
Step 4. Click OK to exit TCP/IP
Properties window.
Step 5. Click OK to exit the Network
window.
Step 6. If prompted to restart
Windows 95OSR2/98/Me,
click Yes. If you are not
prompted to restart Windows
95OSR2/98/Me, do so
manually. Proceed to the
next section titled
“
click Yes. If you are not
prompted to restart Windows
95OSR2/98/Me, do so
manually. Proceed to the
next section titled
“
.”