Wistron Corporation 2008MIN4370 ユーザーズマニュアル

60

2.

Scroll down the list and select 

3.

Select 

4.

Check the 

Traffic Active option and make sure the Use alternative route option is deselected.

5.

Select the 

Alert Options button on the screen. 

A new screen appears on which you can set 
the options relevant to the Alert mode.

Check one or more of the following options:

Live Alert: When checked, the receiver will 

inform you of a traffic event located along 
your route as soon as it is detected.

Reminder at 40 mi: If you check this option, the 

receiver will remind you of the traffic event it 
has received earlier. The message will appear 
when this event, located somewhere along your route, is 40 miles away from your current 
location (not a point-to-point distance but measured along the route).

Reminder at 20 mi: Same as above but the distance from the event is only 20 miles

Reminder at 10 mi: Same as above but the distance from the event is only10 miles

6.

Select 

Save to validate your choices and then come back to your usual guidance screen.

When you use the TrafficKit in the Alert Mode, the following will occur when new Traffic events are 
received:

•

If an event affects your route, a warning message will appear on the screen at a time or 

distance defined in the Alert Options menu.

•

If you do not acknowledge the message by pressing the ENTER button, it will 

automatically disappear after 10 seconds. Additional warning messages, if any, will appear 
in turn on the screen.

•

Events that affect your route will also appear as road signs in the maneuver list, and also 

in the lower part of the TrueView screen. 

•

The map screen will show road signs corresponding to the Traffic events, including those 

which do not affect the route. You can obtain detailed information on any event by 
selecting the icon on the map screen. A dialog box will open containing a description of 
the event.