Oblong Industries 0000054 ユーザーズマニュアル
Performance tips
Microphone occlusion
In the diagram below, a thumb is covering one of the wand microphones. Try to avoid this
as it reduces tracking performance. In addition, try to avoid blocking ultrasonic signals
with your own body. The fixed ultrasonic emitters located on the ceiling or on the displays
need a clear line-of-sight to be heard by the wands.
In the diagram below, a thumb is covering one of the wand microphones. Try to avoid this
as it reduces tracking performance. In addition, try to avoid blocking ultrasonic signals
with your own body. The fixed ultrasonic emitters located on the ceiling or on the displays
need a clear line-of-sight to be heard by the wands.
Wireless interference
Avoid using wireless devices at close range. Nearby wireless devices that use the 2.4GHz
or 900MHz bands may cause wand interference. These include laptops or phones that use
the 802.11b/g band for WiFi communication, cordless phones, wireless sensors, and
Bluetooth™ peripherals.
Avoid using wireless devices at close range. Nearby wireless devices that use the 2.4GHz
or 900MHz bands may cause wand interference. These include laptops or phones that use
the 802.11b/g band for WiFi communication, cordless phones, wireless sensors, and
Bluetooth™ peripherals.
Basic troubleshooting
• Check that the battery is charged and that the RF link is active by inspecting the power
• Check that the battery is charged and that the RF link is active by inspecting the power
and RF indicators.
• Use the browser-based wand admin tool to confirm that wand data is being received by
the system.
• Check that Mezzanine is running.
• Contact Oblong if these steps fail to resolve the problem.
• Contact Oblong if these steps fail to resolve the problem.