RadioFrame Networks Inc MCSERIES10 ユーザーズマニュアル
MC-Series System Installation & Testing
Appendix G: System Manager
RadioFrame Networks, Inc.
133
6Appendix G
System Manager
System Manager is the MC-Series System web-based interface. System Manager provides
status, performance, and alarm information for the MC-Series System and its components, as
well as diagnostic tools and online help. When new releases of System Manager are provided,
download the new release as described in section 8.1 Upgrading System Software.
status, performance, and alarm information for the MC-Series System and its components, as
well as diagnostic tools and online help. When new releases of System Manager are provided,
download the new release as described in section 8.1 Upgrading System Software.
If any of the following information is changed in System Manager, also note those changes on the
Equipment Inventory or site as-built documentation:
Equipment Inventory or site as-built documentation:
• Physical location
• IP addresses
• Port connections
• Sector locations
• IP addresses
• Port connections
• Sector locations
G.1
Logging In to System Manager
1
Connect a laptop computer to port 8 of the BIC CRIC using an Ethernet (CAT5) cable.
2
Start System Manager by setting the IP address of the laptop to the same subnet that was
setup in the system (default 192.168.200.5).
setup in the system (default 192.168.200.5).
The System Manager Home page appears which contains five tabs to select from to set up
and monitor the RadioFrame System MC-Series:
and monitor the RadioFrame System MC-Series:
•
Home—displays a welcome banner and a link for setting up users and changing the MC-
Series System password.
Series System password.
•
System Configuration—depicts the status of the BIC, AIC, RBS, and RadioBlades.
•
Alarms—displays alarm information.
•
Performance Monitoring—displays real-time performance information.
•
Diagnostics—provides tools for testing.
•
Support—displays support information, including online help.