GE Lighting 94440 ユーザーズマニュアル
Integrated Dimming
With integrated dimming you can control your
lights without using an in wall dimmer switch. You
can also set moods or scenes by connecting
multiple lights to the same wireless remote.
Your Lutron
Your Lutron
®
Pico
®
wireless remote is pre-paired to
work with the GE telligent
™
LED lamp with
integrated dimming. See instructions to pair
multiple lights with a single remote.
For more wireless remote set up and information
For more wireless remote set up and information
on, tabletop pedestals, faceplates, and mounting
adaptors, visit
lutron.com/ picoremote.
Instructions and Setup
Dims to off
Brightens
Dims
Brightens to
full intensity
full intensity
Tap once:
Adjusts to
Adjusts to
favorite level
Press and hold
for 6 seconds:
Saves new
favorite level
Remote Control
10-year battery life
30 feet or more wireless range
OPTIONAL
: How to control multiple light bulbs.
To pair additional telligent
™
LED light bulbs with this remote control.
No Setup Required
Remote and LED in package are pre-paired.
Simply keep the light switch on and remote will work at any time.
Simply keep the light switch on and remote will work at any time.
The remote will not work if
the light switch connected to the lamp is turned off.
1
2
3
Repeat these steps to pair additional light bulbs.
Control up to 10 GE telligent™ LEDs with 1 remote.
Control up to 10 GE telligent™ LEDs with 1 remote.
x3
3 seconds
Turn off the light
bulb with the
light switch and
light switch and
wait 3 seconds.
The battery in this device contains Perchlorate material, special handling may apply.
For more information visit www.dtsc.ca.gov/hazardouswaste/perchlorate.
Turn on the
light bulb with
the light switch.
the light switch.
Immediately
press and hold the bottom
button on the remote control until the
light bulb flashes 3 times.
OFF
ON
The GE telligent lamp will turn on to full
brightness every time power is applied. For
example, turning the lamp off then on with a
light switch will turn the lamp on to full
brightness.