BodyMedia Inc. 185 ユーザーズマニュアル
BodyMedia FIT Armband BW Manual
BodyMedia FIT Armband BW Manual
4. Wear the Armband no more than 23 hours a day.
Be sure to leave it off 1 hour per day.
Be sure to leave it off 1 hour per day.
5. Replace the strap if it has lost its elasticity.
Information on obtaining replacement parts can
be found in the Quick Start.
Information on obtaining replacement parts can
be found in the Quick Start.
The Armband will turn on and begin collecting data within 10 minutes. Activation
is indicated by a series of audio tones. Please note that there is no power button on
the Armband.
is indicated by a series of audio tones. Please note that there is no power button on
the Armband.
If you haven’t worn your Armband in a while, press the status button to activate it
before wearing it again.
before wearing it again.
To clean the Armband:
1. Gently wipe the side of the Armband that touches the skin with a soft cloth or
towel moistened with a mild soap and water.
2. Wipe with a clean damp cloth to remove any excess soap.
3. Use a dry, soft cloth or towel to completely dry before wearing it.
1. Gently wipe the side of the Armband that touches the skin with a soft cloth or
towel moistened with a mild soap and water.
2. Wipe with a clean damp cloth to remove any excess soap.
3. Use a dry, soft cloth or towel to completely dry before wearing it.
To clean the Armband strap:
1. Hand wash with mild soap and warm water, rinse, then air dry.
2. Machine drying may affect the performance and lifespan of the strap.
1. Hand wash with mild soap and warm water, rinse, then air dry.
2. Machine drying may affect the performance and lifespan of the strap.
4
Proper Wear and Cleaning
Wear your Armband on the back of the upper left arm (the tricep). To work properly,
the Armband logo must face upward towards the shoulder and the silver sensors
on the underside of the Armband will be in contact with your skin.
Wear your Armband on the back of the upper left arm (the tricep). To work properly,
the Armband logo must face upward towards the shoulder and the silver sensors
on the underside of the Armband will be in contact with your skin.
1. Be sure the upper left arm is clean, dry, and free
of lotion or oil then slide the Armband onto your
left arm.
of lotion or oil then slide the Armband onto your
left arm.
2. Adjust the strap so that it fits comfortably, and
then secure the Velcro pull-tab. Ensure that the
sensors on the underside of the Armband
maintain continuous contact with your skin and
that the Armband does not slide off your arm.
then secure the Velcro pull-tab. Ensure that the
sensors on the underside of the Armband
maintain continuous contact with your skin and
that the Armband does not slide off your arm.
3. Do not secure the strap too tightly. You should be
able to place two fingers beneath the strap. Once the strap is adjusted to a
comfortable fit, there is no need to readjust the Velcro tab. Simply slide the
Armband on and off your arm by stretching the strap.
able to place two fingers beneath the strap. Once the strap is adjusted to a
comfortable fit, there is no need to readjust the Velcro tab. Simply slide the
Armband on and off your arm by stretching the strap.
Setup Instructions
Please refer to the Quick Start included in the package for instructions on how
to begin using the system. It only takes a few minutes to get set up and moving
toward a healthier lifestyle.
to begin using the system. It only takes a few minutes to get set up and moving
toward a healthier lifestyle.
Armband Operating Instructions
5