Ortivus AB 410000409 ユーザーズマニュアル
64
10 Appendix
address of the selected MobiMed 300c is displayed. Status shows if the
selected 300c is connected to the 300m.
Unit connection can be established in one of two ways:
• Press Scan, select the preferred address and then press Connect.
Unit connection can be established in one of two ways:
• Press Scan, select the preferred address and then press Connect.
• Type the
Bluetooth
address of the preferred 300c in the unit field and
then press Connect.
To confirm the
Bluetooth
connection, press the ID button on the 300c.
When a connection is established, MobiMed 300m responds to the
signal by displaying a pop-up dialogue with the
Bluetooth
address of
MobiMed 300c.
When the settings dialogue is closed, Close button, MobiMed 300m
When the settings dialogue is closed, Close button, MobiMed 300m
tries to establish connection with the selected MobiMed 300c if status
was disconnected.
Figure 41. Unit connection settings
10.1.3 System settings
The System settings (see Figure 42.) are accessible only via password.
These settings are described in more detail in the MobiMed 300
Technical Manual.
• Selecting Com status makes the communication status view visible.
• Selecting Com status makes the communication status view visible.
• Selecting Version makes a new view with system information such
as program version and system configuration visible.
• Selecting Event viewer makes the event viewer visible.