IKUSI ELECTRONICA S.L. TR800-US ユーザーズマニュアル

 
 
 
 
 
 
 
 
 
 
 
 

 

 
 

 

IKUSI guarantees the TM70 remote control sets for a period of up to one year after the 
date of delivery. This guarantee covers repairs and the replacement of defective pieces 
at our Technical Service Department. Both the transmitter and receiver will be 
necessary if any repairs or replacements need to be carried out. 
 
The guarantee does not cover damage resulting from the following: 
 
- Transport, 
- Incorrect 

installation, 

- 

Repairs or alterations made to the equipment by personnel other than from 
IKUSI, 

- 

Obvious misuse or incorrect maintenance of the equipment. 

 
Our Technical Service reserves the right to evaluate breakdowns and damage. 
 
Under no circumstances will IKUSI be held responsible for hold-ups at work, accidents 
or expenses incurred as a result of equipment malfunctioning. 

 
 

 

This equipment is designed for use in an industrial environment. However, we 
recommend you follow the instructions below to extend the life span of your remote 
control set: 
 

 

Use the belt provided with the transmitter to prevent the transmitter from falling. 

 

Do not clean the transmitter with solvents or pressurised water. Use a damp cloth 
or soft brush. 

 

Use and recharge the battery regularly. 

 

Check every day that the STOP button is working. 

 

Disconnect the receiver cables if soldering/welding work is going to be carried 
out on the crane. 

 

Periodically check the condition of the transmitter rubber seals. Change these 
over if they show signs of deterioration to ensure they remain watertight. 

 

Clean the battery contacts. 

 

  

TM70Bi.v2.1a.doc  (06/04) 

11