Wilson Electronics LLC 271230SA ユーザーズマニュアル

Installing a Wilson Outside Antenna
To receive the best cell signal, select a location in the center of the vehicle’s roof 12 inches 

away from any other antennas and free of obstructions.
Follow the specific antenna installation instructions included with the outside antenna (sold 

separately).

The outside antenna must be installed 

vertically.  Signal performance will be 

degraded if the antenna is not vertical.
The antenna cable may be run through the 

door to the amplifier.

The antenna cable is small enough to easily 

tuck under the door seal or plastic molding.

For a more professional-looking installation, 

the antenna cable may be run under the 

door seal.  Carefully pull down the door 

seal.  Run the cable through the seal 

and push the seal back into place.  This 

prevents constant wear and tear on the 
cable as the door opens and closes.

Warning: Do not use any type of glass-

mount antenna with this amplifier.  The outside 

and inside antennas must be shielded from 

each other to prevent oscillation.

Warning: The outside antenna must 

have a separation of at least 10 inches from all 

persons during normal operation.