Wilson Electronics LLC 2B4310SM ユーザーズマニュアル

Model #2B4310, Part #814310

FCC ID: PWO2B4310SM  

IC: 4726A-2B4310SM

Patent Pending
The term “IC” before the radio certification number only signifies that 

Industry Canada technical specifications were met.

How it Works
Your new Wilson SignalBooST™ Amplifier has been carefully engineered to significantly 

improve the performance of your cell phone or cellular data card. Together with an antenna, 

the amplifier’s state-of-the-art technology is designed to increase your signal up to 10-15 

times, reduce disconnects and dropouts, and increase data communication rates needed 

for 3g technologies.  The universal connector works with all iDEn data cards.
The antenna will collect the cell tower signal and send it through the cable to the amplifier. 

The signal is then boosted and sent through the extension cable to either the universal 

connector on your data card or the cradle antenna with your cell phone, which then 

communicates with the improved signal. When the cell phone or data card transmits, the 

signal goes through either the universal connector or the cradle antenna, is boosted by the 

amplifier and broadcast back to the cell tower through the antenna.
notE: Use of this amplifier with an antenna gain higher than 6.12 dBi on a vehicle or within 

a building is in violation of FCC regulations. All Wilson mobile antennas have 6.12 dBi or 

less gain. Use of this amplifier with an outside fixed building antenna gain exceeding 15 dBi 

is in violation of FCC regulations. All Wilson Yagi antennas have gains of 15 dBi or less. 

Use of antennas with higher than the above maximum allowable gains is in violation of FCC 

regulations for which the offender is fully liable.

SignalBooST™

amplifier

12 V DC power

supply (vehicle)

Universal

connector

VElCRo

®

adhesive

Bracket

adhesive/Screw

Swivel Bracket

air-vent

Bracket

Cell Phone

Cradle Plus