Wilson Electronics LLC 460032 ユーザーズマニュアル
CELL PHONE SIGNAL BOOSTER
7
5. If the solid orange light persists, and you are not experiencing the desired
signal boost, more advanced troubleshooting may be necessary through
weBoost Customer Support at support.weboost.com or contact 866.294.1660.
Light Of
If the eqo Booster’s light is off, verify your surge protected power strip has power.
Note: The eqo Booster can be reset by un-plugging and re-plugging the power
supply from the power strip.
Green Light, But Poor Coverage
After each step, always un-plug and re-plug the power supply so the Booster can
update the signal reading. Always un-plug and re-plug from a power strip NEVER
from the Booster.
update the signal reading. Always un-plug and re-plug from a power strip NEVER
from the Booster.
1 Increase separation between Antenna and Booster. Un-plug and re-plug power
supply from power strip.
2 Rotate the Booster in small increments 5-10 degrees at a time. Un-plug and re-plug
power supply from power strip.
3 Move the Booster to a diferent location. The stronger the signal at the Booster
location, the better chance of improved coverage from the Antenna. Un-plug and
re-plug power supply from power strip.
4 To determine what your signal is like before and after you power on the Booster,
refer to STEP 1 on page 2 - Find The dBm Reading On Your Phone.
Unable To Get Coverage Needed
If you are unable to get the coverage area needed, contact Customer Support for a
FREE external antenna kit.
______
(TROUBLESHOOTING cont.)