Wilson Electronics LLC 460033 ユーザーズマニュアル
2
Contact Wilson Electronics Technical Support Team with any questions at
866-294-1660 or email: tech@wilsonelectronics.com
Please read all instructions before installing and check the parts supplied against those
listed in this guide. Wilson Electronics weatherproof antenna is omni-directional and ideal
for many marine applications including small boats, cabin cruisers and yachts.
listed in this guide. Wilson Electronics weatherproof antenna is omni-directional and ideal
for many marine applications including small boats, cabin cruisers and yachts.
Our innovative design results in high efficiency and low signal loss, which means more
signal to your cellular device.
signal to your cellular device.
Package Contents Include
1 - 4G Marine Antenna Booster
1 - 4 foot Donor Antenna
1 - 3 foot Server Antenna
1 - 25 foot Power Cable
1 - 4 foot Donor Antenna
1 - 3 foot Server Antenna
1 - 25 foot Power Cable
Compatible with standard 1” x 14 thread Marine Mounts
Wilson Electronics Marine Mount 901119 (sold separately)
Wilson Electronics Marine Mount 901119 (sold separately)
Carefully Determine Your Mounting Location
The Wilson Electronics Marine Booster should be mounted as high as possible with no
obstructions. Marine antennas work on a “line-of-sight” basis, so the higher your antenna
is, the farther it can receive a signal. This gives you a greater range for your cellular
communications.
obstructions. Marine antennas work on a “line-of-sight” basis, so the higher your antenna
is, the farther it can receive a signal. This gives you a greater range for your cellular
communications.
For assistance with your installation, contact Wilson Electronics Technical Support toll free at
866-294-1660 or visit www.weboost.com/us/support-center/
866-294-1660 or visit www.weboost.com/us/support-center/
Vertical Placement
Vertical placement is very important for proper operation. There may be a desire to angle
the antenna backwards for aesthetic reasons. However, not having the antenna mounted
vertically decreases its performance.
the antenna backwards for aesthetic reasons. However, not having the antenna mounted
vertically decreases its performance.
A general “rule of thumb” for placement is to install all antennas at least an antenna’s
length away from other antennas. If there is not enough separation between antennas
then oscillation (feedback) may occur causing the Signal Booster to power down.
length away from other antennas. If there is not enough separation between antennas
then oscillation (feedback) may occur causing the Signal Booster to power down.