Wilson Electronics LLC 806D ユーザーズマニュアル
4
5
labeled “CELLULAR PHONE”.
4.2.4 An external antenna adapter is required
(sold separately)
to connect the
AMPLIFIER to the cellphone. External antenna adapters connect directly
to the antenna extension cable.
4.2.5 Connect the DC power supply to the AMPLIFIER. Verify that both
the OUTSIDE ANTENNA and the ADAPTER EXTENSION
CABLE are connected before powering up the AMPLIFIER.
NOTE: Visit our website at
www.wilsonelectronics.com
for the latest adapter
cross reference chart. If your phone’s adapter is not available from
your retailer contact us at 1-866-294-6996 and we will help you locate
one in your area. For further assistance contact our technical support
Toll-Free at 1-866-294-1660.
NOTE:
iDEN
Antennas
are recommended for
iDEN Amplifier 814001
.
5. AMPLIFIER SPECIFICATIONS
DIRECT CONNECTION AMPLIFIER PHYSICAL SPECIFICATIONS
Connectors FME-Male 50 Ohms
Connectors FME-Male 50 Ohms
Dimensions 5.5x4.3x1.4 (inch) or 14.0x10.8x3.5 (cm)
Weight 1.32 Pounds or 600G
iDEN #814001
AMPLIFIER SPECIFICATIONS
Frequency
806-821MHz Uplink 851-866MHz Downlink
Gain (up/down)
Cell Site Controlled-Max 10/10db
Flatness (up/down)
(+/- 2dB / +/-3dB)
Max RF (up/down)
(+35dBm/+15dBm)
Noise Figure (down)
(3.5dB nominal)
Isolation
Uplink/Downlink 90dB
Power Consumption
1.5A@12V