Wilson Electronics LLC 824D ユーザーズマニュアル

4. AMPLIFIER INSTALLATION (see illustration on pg.4)
4.1 Installing the

Wilson Cellular

Antenna

4.1.1

See antenna packaging for model specific instructions.

4.2 Installing The Amplifier

4.2.1 Select a suitable location to mount the AMPLIFIER.

• In vehicle installation - under the dash or vehicle seat

• In building installation - on a wall or ceiling

NOTE: Mount the AMPLIFIER away from direct sunlight, excessive heat and/

or moisture. The amplifier needs proper ventilation. DO NOT place

the amplifier in an air-tight enclosure.

4.2.2 Connect the outside antenna to the AMPLIFIER side labeled “OUTSIDE

ANTENNA”.

4.2.3 Connect the ADAPTER EXTENSION CABLE to the AMPLIFIER side

labeled “CELLULAR PHONE”.

4.2.4 An external antenna adapter is required

(sold separately)

to connect the

AMPLIFIER to the cellphone. External antenna adapters connect directly to

the antenna extension cable.

4.2.5 Connect the DC power supply to the AMPLIFIER. Verify that both the

OUTSIDE ANTENNA and the ADAPTER EXTENSION CABLE

are connected before powering up the AMPLIFIER.

NOTE: Visit our website at

www.wilsonelectronics.com

for the latest adapter

cross reference chart. If your phone’s adapter is not available from your

retailer contact us at 1-866-294-6996 and we will help you locate one in

your area. For further assistance contact our technical support Toll-Free

at 866-294-1660.

NOTE:

iDEN

Antennas

are recommended for

iDEN Amplifier 814001

The information provided by Wilson Electronics, Inc. is believed to be complete and accurate.

However, no responsibility is assumed by Wilson Electronics, Inc. for any business or per-

sonal losses arising from its use, or for any infringements of patents or other rights of third

parties that may result from its use.