Wellink Corporation NEOBIT1014VA ユーザーズマニュアル

The Quick Start process should enable any computer on your LAN 
to use the NEOBIT 1014VA’s ADSL connection to access the 
Internet. 

To test the connection, turn on the device, wait about 30 seconds, 
and then verify that its LEDs are illuminated as shown in Table 2. 

Solid green to indicate that the device is turned on. If this 
light is not on, check the power cable attachment. 

Flashing on/off while the device is booting. After about 10-
15 seconds, it should turn off. 

Solid yellow to indicate that the USB connection is 
operational. 

Solid green to indicate that the device can communicate 
with your LAN. 

Solid green to indicate that the device has successfully 
established a connection with your ISP. 

Flashing when the device is sending or receiving data from 
the Internet. It may be unlit, flashing, or appear solid 
depending on the current activity. 

 

If the LEDs illuminate as expected, test your Internet connection 
from a LAN computer (and from the USB computer, if applicable): 
Open your web browser, and type the URL of any external website 
(such as 

). The LED labeled WAN ACT 

should be blinking rapidly and may appear solid as the 

device

 

connects to the site. 

If the LEDs do not illuminate as expected or the web page does not 
display, see Appendix C for troubleshooting suggestions. Or, 
contact your ISP for assistance.