Wellink Corporation NEOBIT1014VA ユーザーズマニュアル

requested IP address from the DHCP server. This is 
referred to as a "Configured IP Address" in the program. If 
the configured IP address is not available from the DHCP 
server, the server will distribute another address to the LAN 
port. Even if another number is assigned, the same 
configured IP address will continue to display in this field.  

For a description of how DHCP works, see Chapter 7. 

3. Click 

. 

 If you were using an Ethernet connection for the current 

session, and changed the IP address, the connection will 
be terminated. 

 If you are currently using the USB interface, a page will 

display to confirm your change and your connection will 
remain active. 

 If you enabled the DHCP service, the ADSL Router will 

initiate a request for an IP address from your LAN's DHCP 
server. Assuming a different IP address is assigned, your 
current connection will be terminated. 

 

4.  Reconfigure your PCs, if necessary, so that their IP 

addresses place them in the same subnet as the new IP 
address of the LAN port. See the Quick Start chapter, “Part 2 
— Configuring Your Computers,” for instructions.  

5.  Log into Configuration Manager by typing the new IP 

address in your Web browser’s address/location box. 

If you enabled DHCP, you may need to check the DHCP server 
on your LAN to determine the IP address actually assigned to 
the LAN port. 

6.  If the new settings work properly click the Admin tab, and 

then click 

 in the task bar. 

7. Click 

 to save your changes to permanent 

memory.