Wellink Corporation NEOBIT1014VA ユーザーズマニュアル

Follow these instructions to add an IP route to the routing table. 

1.  From the IP Route Table page, click 

. 

The IP Route – Add page displays, as shown in Figure 40. 

 

2.  Specify the destination, network mask, and gateway or next 

hop for this route. 

For a description of these fields, refer to the table on page 87. 

To create a route that defines the default gateway for your LAN, 
enter 0.0.0.0 in both the Destination and Net Mask fields. Enter 
your ISP’s IP address in the Gateway/NextHop field. 

Note that you cannot specify the interface name, route type or 
route origin. These parameters are used only for routes that are 
identified automatically as the device communicates with other 
routing devices. For routes you create, the routing table 
displays system default values in these fields. 

3. Click 

. 

4.  On the confirmation page, click 

 to return to the IP 

Route table page. 

The IP Routing Table will now display the new route. 

5.  Click the Admin tab, and then click 

 in the 

task bar. 

6. Click 

 to save your changes to permanent 

memory.