Wellink Corporation NEOBIT1014VA ユーザーズマニュアル

Your device may already be preconfigured with the necessary ATM 
VCC properties, or the table may contain placeholder values that 
you must change before using the device. Contact your ISP to 
determine your ATM VCC values. Follow these instructions to 
modify a preconfigured VCC: 

1.  From the ATM VCC Configuration page, click 

 in the 

Actions column for the interface you want to modify. 

The ATM VCC Interface – Modify page displays, as shown in 
Figure 44. 

 

 

2.  Enter the new VPI and VCI values, select the MUX type, or 

change the maximum number of protocols that the VCC can 
carry, as directed by your ISP. 

You cannot modify the interface type over which an existing 
VCC operates (aal5-0, for example). If you want to change the 
interface type, you must delete the existing interface, create a 
new one, and select the desired interface type. 

3. Click 

. 

4.  On the confirmation page, click 

 to return to the 

ATM VCC Configuration page. 

5.  Click the Admin tab, and then click 

 in the 

task bar. 

6. Click 

 to save your changes to permanent 

memory.  

You can verify that the new settings work by attempting to access 
the Internet from a LAN/USB computer. Contact your ISP for 
troubleshooting assistance.