Netgear 06100027 ユーザーズマニュアル

Wireless Networking Basics

B-7

Note: Whatever keys you enter for an AP, you must also enter the same keys for the client adapter 
in the same order. In other words, WEP key 1 on the AP must match WEP key 1 on the client 
adapter, WEP key 2 on the AP must match WEP key 2 on the client adapter, and so on.

Note: The AP and the client adapters can have different default WEP Keys as long as the keys are 
in the same order. In other words, the AP can use WEP key 2 as its default key to transmit while a 
client adapter can use WEP key 3 as its default key to transmit. The two devices will communicate 
as long as the AP’s WEP key 2 is the same as the client’s WEP key 2 and the AP’s WEP key 3 is 
the same as the client’s WEP key 3.

This section discusses the wireless frequencies the 802.11b/g networks use.

IEEE 802.11b/g wireless nodes communicate with each other by using radio frequency signals in 
the ISM (Industrial, Scientific, and Medical) band between 2.4 GHz and 2.5 GHz. Neighboring 
channels are 5 MHz apart. However, due to spread spectrum effect of the signals, a node sending 
signals using a particular channel utilizes frequency spectrum 12.5 MHz above and below the 
center channel frequency. As a result, two separate wireless networks using neighboring channels 
(for example, channel 1 and channel 2) in the same general vicinity interfere with each other. 
Applying two channels that allow the maximum channel separation decreases the amount of 
channel cross-talk and provides a noticeable performance increase over networks with minimal 
channel separation.

Table 8-2

 lists the radio frequency channels the 802.11b/g networks use.

1

2412 MHz

2399.5 MHz - 2424.5 MHz

2

2417 MHz

2404.5 MHz - 2429.5 MHz

3

2422 MHz

2409.5 MHz - 2434.5 MHz

4

2427 MHz

2414.5 MHz - 2439.5 MHz

5

2432 MHz

2419.5 MHz - 2444.5 MHz

6

2437 MHz

2424.5 MHz - 2449.5 MHz

7

2442 MHz

2429.5 MHz - 2454.5 MHz

8

2447 MHz

2434.5 MHz - 2459.5 MHz

9

2452 MHz

2439.5 MHz - 2464.5 MHz